 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| POLYFUSE(R) Resettable PTCs Radial Leaded 600R Series Description * The 600R series is designed to protect against power fault events typically found in telecom applications. This series is designed to be used in applications that need to meet the requirements of GR-1089-CORE and UL60950/EN60950/IEC60950. These resettable devices also help to meet the requirements of ITU K.20, K.21 and K.44. Features Agency Approvals AGENCY AGENCY FILE NUMBER E183209 R50082521 * RoHS compliant and lead-free * Fast time-to-trip * Binned and sorted narrow resistance ranges available Applications Secondary overcurrent protection for: * Central Office Equipment (CO) * Customer Premises Equipment (CE) * 0.15 - 0.16A Hold current range, 60VDC operating voltage * 600VAC interrupt rating * Alarm Systems * Set Top Boxes (STB) * Voice over IP (VOIP) * Subscriber Line Interface Circuit (SLIC) Electrical Characteristics I hold (A) 0.15 0.15 0.15 0.16 0.16 0.16 I trip (A) 0.30 0.30 0.30 0.32 0.32 0.32 V max (Vdc) 600 600 600 600 600 600 I max (A) 3 3 3 3 3 3 Pd max. (W) 1.00 1.00 1.00 1.00 1.00 1.00 Maximum Time To Trip Current (A) 5.0 5.0 4.5 7.5 9.5 9.0 Time (Sec.) 8.0 7.5 18 R min () 6 7 9 4 4 4 Resistance R typ () 12 10 12 10 7 8 R 1max () 22 20 22 18 16 17 X X X X X X X X X X X X Agency Approvals Part Number 600R150 600R150-RA 600R150-RB 600R160 600R160-RA 600R160-R1 Temperature Rerating Ambient Operation Temperature -40C Part Number 600R150 600R160 0.26 0.27 0.23 0.24 0.19 0.20 -20C 0C 23C Hold Current (A) 0.15 0.16 0.124 0.13 0.062 0.07 0.03 0.05 40C 60C 85C 600R Series Specifications are subject to change without notice. Electronics Designers Guide www.littelfuse.com (c)2006 Littelfuse POLYFUSE(R) Resettable PTCs Radial Leaded 600R Series Average Time Current Curves 0.150A 0.160A Temperature Rerating Curve 170% 150% Percentage of Rated Current 130% 110% 90% 70% 50% 30% 10% 100000 10000 1000 TIME IN SECONDS 100 10 -40 -30 -20 -10 0 10 20 30 40 Temperature (C) 50 60 70 80 1 0.100 0.010 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Specifications are subject to change without notice. Note: 1.00 means the number one with two decimal places. AKL V3.9 06.05.15 The average time current curves and temperature rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. Agency Specification Selection Guide For Telecom and Networking Applications Part Number 600R150 600R160 Lightning TIA-968-A - 1.5kV 10/160s 800V 10/560s Telcordia GR -1089-1.0kV 10/1000s 2.5kV 2/10s Devices should be independently evaluated and tested for use in any specific application Power Cross UL60950, 3rd Ed - 600Vac, 40A Telcordia GR - 1089 - 600Vac, 60A 600R Series Specifications are subject to change without notice. Electronics Designers Guide www.littelfuse.com (c)2006 Littelfuse POLYFUSE(R) Resettable PTCs Radial Leaded Protection Application Guide Region/Specification North America Telcordia GR-1089 Application *Access network equipment Remote terminal Repeaters WAN equipment Cross -connect Customer and IT equipment Analog modems ADSL, XDSL modems Phone sets, PBX systems Internet appliances POS terminals Central Office POTS/ISDN linecards T1/E1/J1 linecards ADSL/VDSL splitters CSU/DSU *Intrabuilding communication systems LAN, VOIP cards Local loop handsets Device Selection 600R150 600R160 North America TIA-968-A, UL60950 600R150 600R160 North America Telcordia GR-1089 North America Telcordia GR-1089 South America/Asia/Europe ITU K.20 and K.21 *Resistance binned parts are recommended 600R150 600R160 600R150 600R160 Soldering Parameters - Wave Soldering Condition Peak Temp/ Duration Time > 220C Preheat 140C~ 180C Storage Condition Wave Soldering 260C < 5 Sec 2 Sec ~ 20 Sec 180 Sec ~ 210 Sec 0C~35C, < 70%RH Temperature (C) 260 220 Soldering Cooling * Recommended soldering methods: heat element oven or N2 environment for lead-free * Devices are designed to be wave soldered to the bottom side of the board. * Devices can be cleaned using standard industry methods and solvents. * This profile can be used for lead-free device Note: If soldering temperatures exceed the recommended profile, devices may not meet the performance requirements. 190 160 Preheating 0 180 to 210 2 to 5 Time(s) 20-30 600R Series Specifications are subject to change without notice. Electronics Designers Guide www.littelfuse.com (c)2006 Littelfuse POLYFUSE(R) Resettable PTCs Radial Leaded Soldering Parameters - Solder Reflow Condition Peak Temp/ Duration Time > 220C Preheat 160C~ 190C Storage Condition Reflow 260C > 5 Sec 30 Sec ~ 60 Sec Temperature (C) 260 220 Soldering Cooling 60 Sec ~ 90 Sec 0C~35C, < 70%RH * Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-free. * Devices are not designed to be wave soldered to the bottom side of the board. * Devices can be cleaned using standard industry methods and solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Physical Specifications Lead Material Soldering Characteristics Insulating Material Device Labeling Tin-plated copper Solderability per MIL-STD-202, Method 208E Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Marked with LF, voltage, current rating, and date code. 190 160 Preheating 0 60 to 90 30 to 60 Time(s) 120 Environmental Specifications Operating/Storage Temperature Maximum Device Surface Temperature in Tripped State Passive Aging Humidity Aging -40C to +85C 125C 85C/85C, 1000 hours +85C, 85%R.H. 1000 hours MIL-STD-202F Method 107G +125C to -55C 10 times MIL-STD-202, Method 215F Thermal Shock Solvent Resistance 600R Series Specifications are subject to change without notice. Electronics Designers Guide www.littelfuse.com (c)2006 Littelfuse POLYFUSE(R) Resettable PTCs Radial Leaded Dimensions A C Littelfuse Trademark 150 XXXX 600 Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) Marking B D E F Figure A Part Number 600R150 600R150-RA 600R150-RB 600R160 600R160-RA 600R160-R1 Inches Max. 0.53 0.53 0.53 0.63 0.63 0.63 mm Max. 13.5 13.5 13.5 16 16 16 Max. 0.50 0.50 0.50 0.50 0.50 0.50 B Inches mm Max. 12.6 12.6 12.6 12.6 12.6 12.6 Max. 0.24 0.24 0.24 0.24 0.24 0.24 C Inches mm Max. 6 6 6 6 6 6 Min. 0.19 0.19 0.19 0.19 0.19 0.19 D Inches mm Min. 4.7 4.7 4.7 4.7 4.7 4.7 Typ. 0.20 0.20 0.20 0.20 0.20 0.20 E Inches mm Typ. 5.1 5.1 5.1 5.1 5.1 5.1 Physical Characteristics Lead (dia) Inches 0.026 0.026 0.026 0.026 0.026 0.026 mm 0.65 0.65 0.65 0.65 0.65 0.65 Material Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Figure 1 1 1 1 1 1 Part Marking System Littelfuse Trademark A C 150 XXXX 600 Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) Marking B D E F Part Numbering System 600 R 160 - RA F PACKAGING STYLE BLANK: Bulk R: Tape & Ammo SERIES QUANTITY CODE: F=200 U=500 Rx: Resistance Range (x = A-Z or 1-9) [not applicable for all parts] T: PRE-TRIPPED DEVICE (OPTIONAL) I HOLD CURRENT CODE (SEE TABLE BELOW) R: RADIAL PEAK VOLTAGE RATING Packaging I hold (A) 0.15 0.16 I hold Code 150 160 Packaging Option Bulk Tape and Ammo Bulk Tape and Ammo Quantity 200 600 200 500 Quantity & Packaging Codes F ZR F UR 600R Series Specifications are subject to change without notice. Electronics Designers Guide www.littelfuse.com (c)2006 Littelfuse |
Price & Availability of 600R150-RA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |